MTX-RC - Dive Regulator
£880.00
MTX-RC - Dive Regulator
£880.00
Go warm, go cold, go deep, go anywhere. Enjoy control in the extreme with the MTX-RC scuba diving regulator. Combining rugged, military grade engineering with the super-smooth breathing experience that Apeks regulators are renowned for, the MTX-RC is the regulator that lets you explore more.
See full details
Item n°:
RG122130
FEATURES
First Stage
- Satin plated brass body with heat exchanging ribs for maximum thermal performance.
- Break through, innovative over-moulded first-stage endcap and environmental diaphragm helps prevent ice build-up that can cause first stage free flow in extreme circumstances. Also protects the first stage from impact damage.
- Ribbed diaphragm clamp for improved heat exchange in cold water conditions.
- Unique over-balanced diaphragm design – as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a faster rate than ambient. This results in superior performance at depth.
- 5 x medium pressure ports, 4 mounted on a rotating turret for improved hose orientation
- 2 x angled high pressure ports for optimal hose routing and fitting of transmitters.
- Double swivel hose for greater freedom of movement and comfort.
- Easy to grip DIN hand-wheel or over-moulded yoke hand-wheel, only requires one hand to release.
- DIN, Yoke and M26 Thread available, 300bar, 232bar and M26 300bar (O2) respectively.
- Tested for Octopus use - EN250A to 60 metres cold water.
- Nitrox/Oxygen compatible – Up to 40% O2 outside the EU (European Union), within the EU anything above 21% O2 must use an M26 Connection.
ADDITIONAL DETAILS
Second Stage
- Protective bumpers to protect the second stage from impacts and scratches in the most vulnerable places.
- Ergonomic and simple to use venturi lever.
- Oversize breathing effort adjuster makes adjustment easy in cold water whilst wearing gloves.
- Large purge button.
- Reversible second stage for either a left or right hand gas supply configuration.
- A heat exchanger (patented) dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water for a more comfortable breathe.
- Features an innovative Diver Changeable Exhaust system (DCE). The system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. The regulator is supplied with both sets of exhaust tees.
- Comfo-bite mouthpiece
- Flexible nylon braided hose, which has better cold water performance than traditional rubber hose.
- Designed and manufactured in the UK.
- No single use plastic in the packaging
HEAT EXCHANGER
Unique 1st stage design allows for maximum surface area to draw heat from the water to increase breathing gas temperature.
SPECS
- Connections Yoke and DIN available
- Type of first stage Over-balanced diaphragm design, environmentally sealed
- Body Type One piece forged body
- Number of HP ports 2 (7/16" UNF)
- Number of MP ports 5 (3/8" UNF)
- Environmental Dry Kit Standard
- First stage exterior Satin chrome
- Orientation Convertible LH or RH
- Coldwater Use: Yes - extreme
- Type of second stage Pneumatically balanced
- Opening Effort Control Knob: Yes
- Integrated Venturi Lever: Yes
- Mouthpiece Comfo-bite™
- Exhaust tee Diver Changeable - one set supplied
- Heat Exchanger for freezing resistance: Yes
- Hose type Braided Flexi-hose
- Nitrox compatible: Yes to 40% O2 when new, out of the box / Can be O2 cleaned to 100%.